Logic probes are used to analyze the logic states (high/true: logic 1 or low/false: logic 0) of digital signals. To verify and debug today ’s high-speed, low-voltage digital signals, you need logic ...

Hackaday reader [JumperOne] was in need of a logic probe that he could use to reliably test some tiny .5mm pitch IC pins. The probe that came with his oscilloscope was a bit too big and not near sharp ...

The logic probe is powered from the device under test (DUT)—it may be any binary logic, which can be powered in the range +2 V to +6 V. This may be a microcontroller or 74/54 series logic chips, ...

Semiconductor / High Density Fine point, spring loaded probes, which are usually mounted in a test jig. They are used to test semiconductor interconnects and high-density circuit boards. Coaxial A ...

Paired with the 16900A logic analysis system, the E8045B logic analysis probe promises extensive visibility into the Pentium 4 processor in the 775-land package. The probe interfaces the logic ...

One of the most basic tools for tinkering with electronics is a multimeter. Today, even a cheap meter has capabilities that would have been either very expensive or unobtainable back in the 1970s.

Santa Rosa, CA. Keysight Technologies has introduced two extreme-temperature probing solutions: the N7007A extreme-temperature 400-MHz passive probe and the N7013A extreme-temperature extension kit ...

When testing circuits with a logic probe, it is sometimes difficult to watch the LEDS on the probe to determine the logic state. With this probe the logic states are audible. This probe is designed ...